Resin Testing Continued

/
2 Comments


A little more experimenting with resin whilst doing other bits and bobs. I wanted to see how it reacts to sculpey after I'd tried plasticine, so figured I'd remake my plaster hand moulds in something a bit more sturdy. It turned out reasonably well, but I'm having some problem with the latex setting in the moulds, but that could be any number of things, so we'll see how that goes for now. 




About Richard Whillock

A beardy bloke who is pleased by the production of puppets and the set-up of stop-motion stuffs. A love for the scruffy, the textured and the original.

You may also like

2 comments:

  1. J Wallace the Animator19 September 2012 at 14:09

    Mate you tried using a wax realise spray on the resin or is the latex just not setting right.

    ReplyDelete
  2. Unknown19 September 2012 at 14:18

    Yeah I'm using good old vaseline as a release agent, and it seem to work nicely with it so far, but when it comes to actually casting the latex it just wont seem to set. It could be the latex though so I'll have to see.

    ReplyDelete

Popular Posts

  • Exaggeration Animation
    Here is the final little animation for expressing and exaggerating emotion in a face, I had to slow it down to 8fps as it was whizzing pas...
  • Scratch that... New Showreel! (for real)
    After getting a fair bit of feedback from the facebook BCU animation group (see below) on my other showreel, here's a newly amended...
  • Wall-E and Realism
    Wall-e is a stunning piece as an exercise of realism, for the most part anyway. The scenes of Earth as a decayed, desolate landfill site are...
  • Presentation Slide
  • Evaluation & Contextualisation
    The Original Brief: Stop-Motion pre-production  Fabrication process and techniques An in-depth look at the fabrication process for...